|
Contemporary Carbide Technologies
APPLICATION CHART
|
Grade |
R/A |
T.R./PSI |
Suggested
Applications |
| CCT-30 |
82.4 |
425,000 |
Tougher
than CCT-25, Resists extra heavy impact, suggested where
breakage is a problem and wear is not. |
| CCT-25 |
84.0 |
400,000 |
Standard
industry heading grade, heavy impact and gall resistant. |
| CCT-20 |
86.0 |
375,000 |
Medium
impact, usually for stainless steels and high alloys. |
| CCT-15 |
88.0 |
400,000 |
Heavy
shock, used for powder metal compacting, bolt extrusion,
etc. |
| CCT-12 |
89.0 |
375,000 |
Wide
usage, primarily a die grade, medium shock, light extrusion. |
| CCT-302 |
87.8 |
400,000 |
Special
grade with larger grain size to reduce cracking associated
with heading of stainless and exotic alloys, extrusions. |
| CCT-6 |
92.0 |
310,000 |
Seal
rings, pump parts, burnish rings. |
| CCT-3 |
93.0 |
255,000 |
Compact
dies, wire dies. |
CCT-6N |
91.0 |
260,000 |
Nickle binder used for severe wear applications. |
This
chart is just a general guide, please call or fax
for specifics and composition of required grade.
Certificates of material are available upon request.
|
